The automatic nucleic acid extraction system is an instrument used to extract nucleic acid, which can be used in various fields such as disease control centers, clinical disease diagnosis, blood transfusion, forensic identification, environmental microorganism detection, food monitoring, animal husbandry and molecular biology research.

Tips for the use of nucleic acid extractor:

1. Instrument grounding

In order to avoid electric shock accident, the input power cord of the instrument must be grounded reliably.

2. Power supply

Before connecting the AC power supply, make sure that the voltage of the power supply is consistent with the voltage required by the instrument (allowing a deviation of ±10%), and ensure that the rated load of the power socket is not less than the requirements of the instrument.

3. Power cord

The instrument should use the supplied power cord. If the power cord is damaged, it must be replaced but not repaired. The power cord of the same type and size should be used.

4. Instrument placement

The nucleic acid extraction instrument should be put in a place with low humidity, less dust and away from water sources. The room should be well ventilated and free from corrosive gases or strong magnetic fields. To avoid overheating, be sure not to block or cover the ventilation vents. When the instrument is running, the distance between the ventilation holes in the front and back of the instrument and the object should be no less than 25cm. In addition, do not use the instrument on a soft surface, otherwise the ventilation and heat dissipation at the bottom will be affected.

Excessive ambient temperature will affect the performance of the instrument or cause malfunctions. Do not use the instrument in direct sunlight, and keep it away from radiators, stoves and other heat sources.